Warman AH Slurry Pump: Based on XAH type, its overcurrent components are changed from high chromium alloy to ceramic, with ultra-high hardness, chemical stability and superior wear & corrosion resistance for abrasive and corrosive media.

Standard High Duty Slurry Pump XHH(R)

The high head slurry pump XHH(R) is a cantilevered, horizontal, centrifugal slurry pump, which is specifically designed to combat the need to run conventional to generate high heads often required in many modern slurry pumping application single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while the Wear-Resistant Slurry Pump and High Head still offering optimum wear life and efficiency.

Standard High Duty Slurry Pump XHH(R) Technical Range:

Standard Heavy Duty Slurry Pump XHH(R) Main Pump Model:

Clear Water Performance Datasheet

For high density, strong abrasive slurry, the flow range is 40~80%;

For medium density, medium abrasive slurry, the flow range is 40~100%;

For low density, low abrasive slurry, the flow range is 40~120%.

For details, please refer to the bottom clear water performance table.

Outline drawing

Outline Dimensions

High Head Slurry Pump Features

1. Our XHH Series high head centrifugal slurry pump has only one impeller that allows slurry to enter the chamber from the suction side. It is a centrifugal high head slurry pump designed to handle high pressure, high flow applications.

2. The interior of the double-sleeve design is a wet end made of wear-resistant high chrome.

3. Different types of impellers are designed to handle different flow patterns.

4. The shaft is sealed with a packing gland. Propeller dynamic sealing and other mechanical seal configurations are an option.

5. The XHH Series high head centrifugal slurry pump is designed to deliver high volume, low lift high speed pumps. It is suitable for low-abrasive, low-viscosity slurry pumping applications.

6. The discharge have 8 positions spaced at 45 degrees and can be selected to meet installation and application requirements.

High Head Slurry Pump Advantages

1. The double-sleeve design of our single-suction High Head Electric slurry pump allows for axial splitting. Made of ductile iron, the pump casing is able to withstand the main pressure generated in the pump chamber. The lining is made of wear-resistant material and does not stick to the outer casing for easy maintenance and replacement.

2. The High Head Electric slurry pump body is fixed to the mount by a plurality of bolts. The user can easily adjust the gap between the impeller and the suction pad from below the housing.

3. Packing gland seals, mechanical seals and drain seals prevent mud leakage during pumping.

4. The compact construction allows the pump to occupy a small footprint.