Standard Heavy Duty Slurry Pump XAH

Pump type XAH is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. It maintains high efficiencies over the wear life of its components. This type of pump typically used in heavy minerals processing, mineral recovery process plant transfers, wet waste processes, recycling-washing plant, sand plant duties and chemical process plant.

Standard Heavy Duty Slurry Pump XAH(R) Technical Range:

Standard Heavy Duty Slurry Pump Feature：

(1)Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life

(2) Large diameter, high efficiency impellers designed to offer maximum wear life and low operating cost, wide options of impeller for specific applications

(3)Gland, expeller or mechanical seals are available to suite different working conditions

(4)The bearing can be grease or oil lubricated which offer ease of maintenance and reduced downtime

(5)The pump can be installed in multi-stage high pressure operation

(6)Large internal passage designed to reduce internal velocities to maximize wear life and lower operating cost

Standard Heavy Duty Slurry Pump XAH(R) Main Pump Model:

Pump Model XAH Clear Water Performance Datasheet

Pump Model XAH Slurry Pump Metal Wet Parts

We Xingou uses high-wear-resistant, corrosion-resistant high-chromium alloy metal flow parts, and strictly adheres to production processes and inspection standards that include quenching, heat treatment, and dynamic balancing. The chromium content is controlled between 26-27%.

Outline drawing

Outline Dimensions

Standard Heavy Duty Slurry Pump XAH(R) Installation Types :

DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.

CV Type: The tailing handling slurry pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.

ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.

CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.

Standard Heavy Duty Slurry Pump Using Range: